Before delivering silent diesel generating set, although it has been debugged, after the field installation or before the official start-up, we should also do commissionning again to ensure the unit work normally. Here we tell you how to debug silent diesel generator set after installed on site. Step 1: Inspection 1.Check whether the surface of silent genset clean, whether the anchor nuts and other moving parts are loose. If any problems are found, fasten them in time. 2.Check the condition of the fuel supply system. 1)Check whether the air vent on the fuel tank is unblocked. If there is dirt, remove it. 2)Loosen the bleed screw of diesel filter or fuel injection pump, pump oil by hand, and remove air in oil circuit. 3)Check whether there is any leakage in the oil pipe joint, if there is any problem, it should be handled in time. 4)Check whether the tightness of the drive belt is appropriate, the method is to press the middle part of the belt by hand, an...
We share Technical Support and News about generators. Diesel generator set supply/Manufacture