Starlight generator

What is the reason of Volvo diesel generator start failure problem? Today Starlight manufacturer solve problem for you. The reason why the diesel engine can't work properly is that we should first understand the primary condition for the normal operation of the diesel engine. We all know that the primary condition for the normal operation of the diesel engine is that the diesel engine with good chemical composition can be injected into the combustion chamber accurately and timely, and that the compressed air in the combustion chamber must reach enough temperature before it can work properly. Fire, eruption. To satisfy these two conditions, it is necessary to have a high enough speed and a certain temperature in the cylinder when starting the diesel engine. When the diesel engine can not start, the reasons should be found from starting work, fuel supply system and compression of the diesel engine. 1.The ambient temperature is too low. At this time, the diesel engine ca...

This article mainly talks about how to solve the faults of electrical control in diesel generator set. 1.When the key is turned to “START” for the manual control genset, the genset does not start or the liquid crystal display module controls the genset, and the genset does not start when turn on the start button. A.Check whether the key switch is working correctly or whether the module start-up port has output; B.Check whether there is any fault indication, repair the fault if necessary, and reset the corresponding fault information; C.Check the battery voltage. If the voltage is too low, you need to recharge the battery to full. If the voltage value is normal, you should gradually check whether the voltage signal is correctly sent to all control links according to the drawing, such as throttle solenoid valve and starter motor etc; D.Check if the emergency stop button has been relaxed; E.Check whether the start relay good. 2.Start motor, it can work, but th...

The function of diesel genset oil pressure gauge is to show the situation of oil pressure in lubrication system. Oil pressure is an important indicator of lubrication system. Its value size indicates the strength of lubrication. Many people may not know that the oil level of diesel generator also represents whether the lubrication system is good. Today Starlight teaches you how to know faults from oil pressure gauge of generators.   1.Oil pressure is always too low. Whatever   diesel generator   is at low speed or high speed, or at low temperature or high temperature, if the oil pressure gauge always indicates less than 0.1Mpa and the oil pressure alarm lamp flickers, which means that the oil pressure is too low. Methods for finding out the reasons: Firstly, screw down the oil ruler to check whether the oil in the disc is sufficient and whether the oil is too thin; Secondly, check whether the oil pressure gauge and the induction plug are out of or...