Starlight generator

  On May 25, Starlight Power received the monitoring report of occupational hazard factors from Jiangsu Liwei Testing Technology, which showed that all the inspected positions of Starlight Power met the requirements of occupational monitoring standards.   Daily monitoring is voluntary testing by individuals, enterprises, social groups and state organs. Starlight has always adhered to the attitude of being responsible for employees, customers and society, and paid more attention to the training of employees' occupational hazard protection knowledge and the supervision, inspection and assessment of the correct wearing of personal protective equipment.   After the Starlight people heard the good news, in addition to joy, many employees also expressed their deep gratitude to the company. Thank the company for attaching importance to the working environment of employees, so that employees can work in a safe, healthy and comfortable environment.   "Pursuing ...

  Fault feature 1: The diesel generator cannot reach the specified power.   Possible causes: (1) The bearing is worn. (2) The compressor impeller and its volute flow passage are contaminated. (3) Too much carbon is deposited at the back of turbine and compressor impeller and at the sealing ring.   Troubleshooting: (1) Have professional maintenance personnel replace the bearing. (2) Have them cleaned by professional maintenance personnel.   Fault feature 2: The exhaust smoke color of the   diesel generator   is abnormal, and the exhaust pipe emits black smoke (insufficient air intake).   Possible causes: (1) Some flow passages of compressor are contaminated. (2) The compressor leaks.   Troubleshooting: (1) Have them cleaned by professional maintenance personnel. (2) Ask professional maintenance personnel to check the sealing condition and eliminate air leakage.   Fault feature 3: Blue smoke from exhaust.   Possible causes: (1) The elastic...

The oil-water separator for   diesel generator sets   uses the principle of oil-water density difference to make the oil float on the top, and the particulate matter and sludge settle at the bottom. It is regularly cleaned and eliminated by the submersible cutting pump installed in the sedimentation chamber, and there are also separation elements such as diffusion cone and filter screen inside. In order to allow the diesel generator set to use fuel safely and safely, the oil-water separator has been installed by the diesel generator set manufacturer before leaving the factory. The following are the replacement steps of the oil-water separator.   Install the oil-water separator of the diesel generator set and replace it as follows: 1. Open the water valve and let off part of the fuel.   2. Use a belt wrench to remove the filter element and the water storage cup together, and then remove the water storage cup from the filter element. Both the filter element and the wat...

  The amount of oil used in Cummins generator sets, the quality of oil, the type of oil used in spring and what to use in winter will affect the efficiency and life of the unit. 1. It is necessary to use the right quality grade oil, which is the key to ensure the normal operation of the   Cummins generator set . 2. Temporary use of substitute oil should strengthen observation If the oil supply is not timely or there is no suitable oil, the substitute oil can be temporarily used, but it is necessary to strengthen the observation during use, pay attention to the oil quality and whether the oil filter is blocked, and stop the operation in time if the problem is found. 3. Choose oil of appropriate viscosity The oil with the appropriate viscosity should be selected according to the local temperature. It is wrong to think that the higher the viscosity, the better. Because the viscosity is too large, the oil flow is too slow at the beginning, which will easily increase the wear of th...