Skip to main content

Archive

Show more

Basic Working Conditions of Diesel Generator Set



Basic Working Conditions of Diesel Generator Set

The working conditions of diesel generator set is that it can output the rated power under the condition of prescriptive environment, and also can work reliably and continuously.






The working conditions of power plants (units) stipulated by the national standard is mainly determined by the altitude, ambient temperature, relative humidity, mold, salt fog and the degree of inclination.

The standard working conditions should be adopted to determine the rated power of the diesel genset.

Due to the diesel engine, AC synchronous generator and the control device have its own rules and standards in the national standard, so in the selection and determination of the genset working conditions, these factors should be considered, and it should be based on diesel engine.

According to GB/T 2819-1995 “General Technical Requirements of Mobile Power Station” stipulation, the environment conditions of the rated power outputed by the power station shall be one of the following  requirements and shall be explicitly defined in the product technical conditions.

Altitude
Ambient temperature
Relative air humidity
0m
20°C
60%
1000m
40°C
60%

The diesel genset shall be capable of outputting the specified power (allowing correction) and working reliably under the following conditions.

Altitude: 4000m
Ambient temperature: Upper limit value: 40°C45°C50°C
Lower limit value: -40°C-25°C5°C
Degree of inclination: For the diesel power station, the vertical and horizonal gradient of the power station is not beyond 10°C or 15°C.
Relative humidity, condensation and mold:
a. The diesel generator set working conditions should comply with the following table.

Upper limit value of ambient temperature/°C
40
40
45
50


Relative humidity
Maximum mean monthly relative   humidity

9025°C

9525°C

Mean monthly minimum relative   humidity



1040°C
Condensation


Mold



①Refers that the average minimum temperature of the month is 25°C, the average monthly minimum humidity refers to the average daily minimum temperature of the month.
② Refers that the average maximum temperature of the month is 25°C, the average monthly maximum humidity refers to the average daily maximum temperature of the month.
b. Mildew-growing: After the diesel generator electric parts have been tested through the mildew-growing, the grade of surface mildew shall not exceed level of 2 specified in GB/T 2423.16-2008 “Environmental Test for Electric and Electronic Products”.

ATTENTION!!

The site conditions for the operation of the unit shall be clearly defined by the user, and also shall be specified for any particular hazardous conditions such as explosive atmospheres and flammable gases.






Comments

Popular posts from this blog

Components of Cummins PT Fuel System

When it comes to Cummins generator, it is well known that the gensets have good quality, low fuel consumption, low noise, big output power and reliable performance. The reliable stability, economy, power performance, durability and environmental safety is welcomed by customers. In last article, we talk about CCEC Cummins diesel engines operating principles. Well, in this article, you will learn what are the major components of its PT Fuel System. Fuel System The PT fuel system is used exclusively on Cummins Diesels. The identifying letters, “ PT ” are an abbreviation for “ pressure-time ” . The operation of the Cummins PT Fuel System is based on the principle that the volume of liquid flow is proportionate to the fluid pressure, the time allowed to flow and the passage size through which the liquid flows. To apply this simple principle to the Cummins PT Fuel System , it is necessary to provide: 1. A fuel pump. 2. A means of controlling pressure of

Leroy-Somer Alternator AVR R450

1 - GENERAL INFORMATION of Leroy-Somer Alternator AVR R450 1.1 - Description The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers. - Operating temperature: - 30°C to + 65°C. - Storage temperature: - 55°C to + 85°C. - Shocks on the base: 9 g depending on the 3 axes. - Vibrations: less than 10 Hz, 2 mm half-peak amplitude 10 Hz to 100 Hz: 100 mm/s, above 100 Hz: 8 g. The AVR is IP00, it must be incorporated in an environment which ensures it a IP20 protection. 1.2 - Characteristic The connection is realised by “Faston” connectors and the voltage sensing is single - phase. 2 - POWER SUPPLY Both the SHUNT/AREP & PMG excitation systems are controlled by the AVR. 2.1 - AREP excitation system With AREP excitation, the electronic AVR is powered by two auxiliary windings which are independent of the voltage sensing circuit. The first winding has a voltage proportional to the   alternator   main voltage (Shunt characteristic),

New Yuchai engine YC6K600-D30 power for diesel generator 50Hz