Skip to main content

Archive

Show more

25kva-3000kva diesel generators

 Today Starlight Power company tell you why is oil consumption fast in diesel generator set.

Some generating units in the use of the process, will appear the phenomenon of oil consumption is too fast, but do not know which parts to deal with, for this, we can refer to some content.

When excessive oil consumption is found, it is necessary to first check whether there is oil leakage at the joints between the engine block and the gear housing cover, the large plate on one side of the traveling wheel, the rear cover and the cover cover. In case of oil leakage, pay attention to observe whether the sealing gasket of each connection part is complete, and the damaged sealing gasket of generator set shall be replaced. If the gasket is complete, check whether the connecting screws of each part are loose. Use a wrench to tighten the loose bolts to the specified torque. If the above parts are basically normal, and the oil leakage is in the frame position, the oil shell shall be inspected. The main inspection part is at the front end of the oil shell side on the same side with the traveling wheel. The generator set is mostly due to the looseness of the frame screw, and the traveling wheel rubs with the angle iron of the frame protecting the oil shell under the pulling of the triangular belt, which causes oil leakage.

2.The normal wear caused by long-term use of the engine or abnormal wear caused by improper maintenance will make the cylinder liner of the diesel engine form longitudinal tensile marks, and the cylinder diameter and piston side clearance exceed the specified values, which will reduce the supporting force of the piston ring and cause the phenomenon of dirty oil scraping. Or because the inner support torsion spring in the oil ring is disconnected at the opening position of the oil ring, the scraping oil is not clean and participates in combustion, resulting in serious oil consumption symptoms, such as difficult starting of diesel engine, obvious blue smoke from exhaust pipe, and serious oil injection of respirator. Moreover, when the piston is supposed to be upward, the combustion chamber will be inverted due to the inversion of the direction during assembly. Although it will not affect the starting of the diesel engine, the oil consumption will be very serious. The fuel consumption is about 0.5 kg per day.

3.Although it is rare that the valve guide tube is seriously worn and the engine oil of diesel generator set will be burned, according to the introduction of relevant information, it is also a reason that can not be ignored.

We not only provide diesel generator set technical support, but also provide 25kva-3000kva diesel generators, if you have plan to purchase, welcome to contact us by email sales@dieselgeneratortech.com or call us by phone +8613481024441. We will work with you.

Comments

Popular posts from this blog

New Yuchai engine YC6K600-D30 power for diesel generator 50Hz

Technical Parameters of Boduan 500KW Weichai Generator Set 6M33D572E200

  The 6M33D633E200 diesel engine is a special-purpose diesel engine for land-based power generation in the M33 series. It is a new-structure power generation diesel engine with a centrally - located turbocharger developed by Weichai Power Co., Ltd. in 2016. Continuous Power (COP): The maximum power at which the diesel engine can run continuously under a constant load with no limit on the annual operating hours. It is the ISO standard power. Prime Power (PRP): The maximum power at which the diesel engine can run continuously under variable loads with no limit on the annual operating hours. It is an ISO standard power that allows a 10% overload. Standby Power (ESP): The maximum power in a certain variable - power series that the diesel engine can operate for up to 200 hours per year. It is an ISO standard power with limited fuel consumption.   Operating Conditions and Applications of Baudouin  500KW Weichai Generator Set  Diesel Engine Power Classification Operating Co...

How to know and solve faults of genset voltage transformer

 Today Starlight Power shares the common faults for voltage transformer of diesel generator set. Hope it is helpful to you. 1) The insulation between iron chips is damaged. Fault phenomenon: temperature rises during operation. The possible causes of the failure are: poor insulation between iron chips, bad use of environmental conditions or long-term operation under high temperature, which promote the insulation aging between iron chips. (2) Poor contact between grounding plate and iron core. Fault phenomenon: there is discharge sound between iron core and oil tank during operation. Cause of failure: the grounding plate is not inserted tightly, and the mounting screw is not tightened. (3) The iron core is loose. Fault phenomenon: abnormal vibration or noise during operation. The cause of failure: the iron core clamp is not clamped, and the iron chip is loose. (4) Turn to turn short circuit of winding. Fault phenomenon: during operation, the temperature rises, there is ...