Skip to main content

Archive

Show more

Introduction of difference between alternator and generator

Today Starlight Power generator manufacturer shares the difference among alternator and generator with you.

Alternator vs Generator

Alternators and generators are two devices which generate electricity. An alternator can be called a type of generator. Although both these devices serve the same function, they are quite different in every other aspect.


An alternator is a charging system for cars that produces electricity. Generators are used in the production of large-scale electricity. Both alternators and generators convert mechanical energy into electrical energy. The main difference between them is in regard to what spins and what is fixed.

In an alternator, electricity is produced when a magnetic field spins inside the stator (windings of wire). In a generator, on the other hand, the armature or windings of wire spin inside a fixed magnetic field to generate electricity.

Alternators are considered more efficient than generators. Alternators conserve energy by using only the energy that is needed, while generators use all the energy that is produced. Alternators have a higher output than generators.

When it comes to polarization, alternators and generators are very different. While generators have to be polarized after installation, there is no need for polarization in alternators.

Alternator brushes last longer than those of generators. This is because the brushes in an alternator are used only for carrying current to power the rotor and the slip rings they ride are smooth.

There is another difference between generators and alternators when it comes to charging. An alternator will not charge a dead battery and if you do try to charge it, there is a possibility that it will burn out. A generator, however, can be used for charging a dead battery.

There is also a difference in size as alternators can fit into a small space, while generators are larger.

Summary:

1. An alternator, electricity is produced when a magnetic field spins inside the stator (windings of wire). On the other hand, the armature or the windings of wire in a generator spin inside a fixed magnetic field to generate electricity.

2.Alternators conserve energy by using only the energy that is needed. Generators use all the energy that is produced.

3.Alternators produce voltage when needed and generators produce voltage at all times.

4.Alternators generate a higher output than generators.

Starlight Power has focused on high quality diesel standby generator for more than 43 years. If you are interested or have purchase plan, please contact us by email sales@dieselgeneratortech.com.

Comments

Popular posts from this blog

New Yuchai engine YC6K600-D30 power for diesel generator 50Hz

Silent Cummins 640kw Diesel Generating Sets

Technical data of 800KVA AC diesel generator set The DG Set is skid mounted, directly coupled with Cummins water cooled engine with built in shock absorber for anti vibration. The alternator is Stamford brand with brushless and self excited, with control panel and protection system complete set. Prime power: 640KW/800KVA Standby power:704KW/880KVA Rated voltage: 230/400V Rated current: 1152A Speed/frequency:1500rpm/50Hz ( or 1800rpm/60Hz) Power factory:0.8lag Size: open type genset: 4.2 x1.82x2.25m, silent genset: 6.5 x2.6 x2.78m Net wight: open type genset: 7800kg,   silent genset : 12000kg Technical Data of Diesel Engine Diesel engine brand/model: Chongqing Cummins/ KTA38-G2B( full new) Prime/standby power: 790KW/920KW 4 Stroke Cycle , 60° Vee , 12 Cylinder, Turbocharged &Aftercooled, 1500rpm, 50Hz, bore/stroke: 159/159mm. The Cummins diesel engine is equipped with electronic type governor, over speed shutdown devices to protect against runaway when electronic governor or con...

Guides to Clean VOLVO Diesel Generator Cooling System

VOLVO Engine Cooling System Volvo engine's internal cooling system makes sure the engine works at the right temperature. It is a closed system that must always be filled with a mixture of concentrated coolant and water in order to protect the engine against internal corrosion, cavitation and bursting due to freezing. Coolant of a suitable chemical composition must be used all year round. This also applies in areas where there is never any risk of freezing, to provide the engine of  diesel generator set   with full corrosion protection. The use of anti-corrosion agents alone is not permitted in Volvo Penta engines. Never use water alone as a substitute for coolant. The corrosion protection additives become less effective over time, which means that the coolant must be changed at regular intervals; refer to Maintenance Schedule. The cooling system must be flushed whenever the coolant is changed; Volvo Penta coolants have been prepared to work best ...