Skip to main content

Archive

Show more

Operation of Yuchai diesel engine


Preparations before starting the diesel engine

To make sure that the engine would run properly, the following steps should be done before starting the engine every time:

① Check the oil level in the oil sump. The level should be within the upper and ower scale limits of the oil gauge. If the oil volume is not enough, add some oil as required.

② Check the diesel fuel level in the fuel tank. add some fuel if necessary.

③ Check the coolant level, add some coolant if necessary.

④ Check if there is air in the fuel pipe. De-aerate fuel if there is air in the fuel pipe.

⑤ Check if electrical system works properly.

⑥ Check the ension of the driving belt. the rension should be moderate as required.

⑦ Perform all the technical maintenance as required.



Comments

Post a Comment

Popular posts from this blog

Yuchai Is Super Confident in Its Innovation

Founded in 1951, with 30 wholly-owned, holding and joint-stock subsidiaries, Guangxi Yuchai Machinery Group Co., Ltd. (hereinafter referred to as the Yuchai Group) is an internal combustion engine manufacturing base with the most complete spectrum of products in the country. In recent years, machinery manufacturing industry has been dropped off influenced by domestic and foreign economic situations, especially domestic overcapacity and unreasonable product structure. Reversely, Yuchai has sold over 3 million engines with the annualized revenues amount to RMB 40 billion. Over the years, as China ’ s largest engine R&D manufacturing base, Yuchai adjusts and optimizes its industrial structure and constantly strengthens its capacity for independent innovation. Therefore, the key technology continues to be the top in the sector for further keeping its own top leader in the industry. Innovation-Driven In 2013, seven world-class diesel-engine products for high-s...
Post a Comment
Read more

How to Read Alarm Codes From SmartGen Genset Controller

Auto Module Control Panel is the configuration for nobody on duty controlling generators. This kind of panel adopts auto module control system, with large LCD display to show the menu, such as SmartGen controller. Features:   1. SmartGen 6110 can receive remote output signal from ATS and realize auto start and stop of generators. 2. SmartGen 6310 can realize all functions of 6110, add RS232 interface which can communicate with PC to realize remote operation.  3. SmartGen 6410 Auto Mains Failure controller, can realize all functions of 6310, furthermore can detect  ATS and control directly. The alarm of diesel generator controller is not the amount of stop alarm, which does not affect the normal operation of diesel generator. When the alarm occurs, the unit will not stop, and when the alarm conditions do not exist, the amount of warning will automatically disappear.  Today Starlight manufacturer mainly shares alarm codes for diesel generato...
Post a Comment
Read more

Why does diesel genset lose excitation

Generator loss of excitation fault means that the excitation current provided by the excitation system suddenly disappears completely or partially. After the synchronous generator is out of magnetic, it will be transferred to the asynchronous running state, and the reactive power will be absorbed from the original reactive power conversion. The causes of generator loss of magnetism fault are: generator rotor winding fault, excitation system fault, automatic demagnetization switch trip and circuit fault. The effect of generator loss of excitation on the system: 1. Low-excitation and magnetic-loss generators absorb reactive power from the system, causing the voltage of the power system to decrease. If the reactive power reserve in the power system is insufficient, the voltage in some adjacent points in the power system will be lower than the allowable value, which destroys the stable operation between the load and each power supply, and even collapses the power system voltage. ...
Post a Comment
Read more