Today Starlight Power shares the common faults for voltage transformer of diesel generator set. Hope it is helpful to you. 1) The insulation between iron chips is damaged. Fault phenomenon: temperature rises during operation. The possible causes of the failure are: poor insulation between iron chips, bad use of environmental conditions or long-term operation under high temperature, which promote the insulation aging between iron chips. (2) Poor contact between grounding plate and iron core. Fault phenomenon: there is discharge sound between iron core and oil tank during operation. Cause of failure: the grounding plate is not inserted tightly, and the mounting screw is not tightened. (3) The iron core is loose. Fault phenomenon: abnormal vibration or noise during operation. The cause of failure: the iron core clamp is not clamped, and the iron chip is loose. (4) Turn to turn short circuit of winding. Fault phenomenon: during operation, the temperature rises, there is ...
Our engineer helps customer start and maintain Perkins diesel generator set 1000KW 50Hz 1500RPM two units generating sets.
ReplyDeleteEngine: Perkins / 4012-46TWG2A
Alternator: Engga / EG400-1000N
Controller: Deep Sea / 7320 MKII
20KW to 1800KW Perkins Generator: https://www.dieselgeneratortech.com/perkins/
Email: sherly@dieselgeneratortech.com