Skip to main content

Archive

Show more

How to store temporarily unused diesel generator set

Today Starlight mainly to share how to store temporarily unused diesel generator.

If a automatic diesel generator is not used for a period of time, a reasonable and feasible storage plan shall be made according to the required time.

Automatic diesel generator

The diesel generator set shall be stored according to the steps. It includes cleaning the unit completely, keeping the unit dry and ventilated, and replacing new lubricating oil of proper quality. Completely drain the water in the water tank and conduct rust prevention treatment for the unit.

Storage of automatic diesel generator when not in use in a short period of time.
1.Empty diesel oil.
2.Turn the piston of the diesel engine to the top dead center of compression.
3.Store indoors and and cover it with a cloth.
4.Don't put it in a wet place.
5.Do not put together with inflammable, explosive and corrosive articles.
6.Turn the crankshaft regularly.

Storage of automatic diesel generator when not in use for a long time.
1.First, it shall be carried out according to the items not used in a short period of time.
2.Clean the dirt on surface of whole set of diesel generator. Clean the unit with compressed air.
3.Fill the generator with desiccant and cover the generator end with thick paper. Cover air vent well and fasten with a rope.
4.Empty the engine oil in the oil filter, air filter, etc.
5.Inject 100-200g oil into each cylinder from exhaust manifold. Turn the crankshaft of the diesel engine dozens of times, so that the oil is evenly distributed in the cylinder and the piston is at the top dead center of compression.
6.Remove the valve cover and lubricate the valve structure with dehydrated oil.
7.Seal the exhaust port, air filter, fuel tank vent, smoke vent of low-temperature starting device, etc. with oiled paper.
8.Use detergent to clean diesel engine, alternator, coupling port, frame and components, tools and accessories etc. Of generator. Spread butter for needed part.
9.Rotate the crankshaft 1-2 times a month, and make the piston at the top dead center of compression after each rotation.

Long term storage of diesel generator sets will have a decisive adverse effect on diesel engines and alternators, and proper storage can minimize the adverse effect. Therefore, the correct storage method is very necessary.

In order to prevent the engine and other accessories of the cooling system from freezing and cracking, and prevent the cooling water from corroding the engine body for a long time, add antifreeze when the unit is used in the area where may be frozen. Antifreeze proportion shall refer to the proportion configuration recommended by the diesel engine manufacturer. During long-term storage, the cooling water in the engine and other accessories of the cooling system must be drained.

The unit shall be stored to avoid overheating, supercooling, rain, sun, etc. When storing batteries of the genset, should avoid direct exposure under sunlight or rain.

After a period of storage, it should be noted to check whether the diesel generator set is damaged before installation and use. Comprehensively check whether the electrical part of the unit is oxidized, whether all connecting parts are loose, whether the main generator coil is still dry and whether the engine body surface is clean and dry etc. If necessary, appropriate measures shall be taken to deal with it.

The stotage of temporarily unused diesel generator set is also an important point. Hope this article is helpful to you.

Comments

Popular posts from this blog

Yuchai Is Super Confident in Its Innovation

Founded in 1951, with 30 wholly-owned, holding and joint-stock subsidiaries, Guangxi Yuchai Machinery Group Co., Ltd. (hereinafter referred to as the Yuchai Group) is an internal combustion engine manufacturing base with the most complete spectrum of products in the country. In recent years, machinery manufacturing industry has been dropped off influenced by domestic and foreign economic situations, especially domestic overcapacity and unreasonable product structure. Reversely, Yuchai has sold over 3 million engines with the annualized revenues amount to RMB 40 billion. Over the years, as China ’ s largest engine R&D manufacturing base, Yuchai adjusts and optimizes its industrial structure and constantly strengthens its capacity for independent innovation. Therefore, the key technology continues to be the top in the sector for further keeping its own top leader in the industry. Innovation-Driven In 2013, seven world-class diesel-engine products for high-s...

How to Read Alarm Codes From SmartGen Genset Controller

Auto Module Control Panel is the configuration for nobody on duty controlling generators. This kind of panel adopts auto module control system, with large LCD display to show the menu, such as SmartGen controller. Features:   1. SmartGen 6110 can receive remote output signal from ATS and realize auto start and stop of generators. 2. SmartGen 6310 can realize all functions of 6110, add RS232 interface which can communicate with PC to realize remote operation.  3. SmartGen 6410 Auto Mains Failure controller, can realize all functions of 6310, furthermore can detect  ATS and control directly. The alarm of diesel generator controller is not the amount of stop alarm, which does not affect the normal operation of diesel generator. When the alarm occurs, the unit will not stop, and when the alarm conditions do not exist, the amount of warning will automatically disappear.  Today Starlight manufacturer mainly shares alarm codes for diesel generato...

How to know and solve faults of genset voltage transformer

 Today Starlight Power shares the common faults for voltage transformer of diesel generator set. Hope it is helpful to you. 1) The insulation between iron chips is damaged. Fault phenomenon: temperature rises during operation. The possible causes of the failure are: poor insulation between iron chips, bad use of environmental conditions or long-term operation under high temperature, which promote the insulation aging between iron chips. (2) Poor contact between grounding plate and iron core. Fault phenomenon: there is discharge sound between iron core and oil tank during operation. Cause of failure: the grounding plate is not inserted tightly, and the mounting screw is not tightened. (3) The iron core is loose. Fault phenomenon: abnormal vibration or noise during operation. The cause of failure: the iron core clamp is not clamped, and the iron chip is loose. (4) Turn to turn short circuit of winding. Fault phenomenon: during operation, the temperature rises, there is ...