Skip to main content

Archive

Show more

Datasheet of Deutz diesel engine BF8M1015CP-LA G5 of 500kw generator set

Jiangsu Starlight Electricity Equipments Co.,Ltd. is authorized as the OEM supplier of Deutz diesel engine of generator set in China. Jiangsu Starlight Deutz series diesel generator set power range is from 26kw to 660kw. Today we mainly share Deutz diesel engine BF8M1015CP-LA G5 of 500kw generator set.

Characteristic of Deutz diesel engine BF8M1015CP-LA G5 of 500kw generator set.
1.Compact structure, reasonable design, reliable and excellent performance;
2.Long working life and economical use;
3.In terms of product structure, it has three product platforms, i.e. C, E and D, with power covering 85-340 horsepower and more than 300 varieties of variant and adaptive products. It can provide power products with higher scientific and technological content and higher degree of specialization for different demand fields, such as medium and heavy trucks, light vehicles, buses, construction machinery, etc;
4.Diesel engine has advanced, efficient, reliable, energy saving, environmental protection and a series of significant advantages. It has the function of air inlet and return, and can adapt well to the plateau and high altitude areas.

Deutz generator set

Deutz diesel engine BF8M1015CP-LA G5 for 500kw generator set performance data
Diesel engine power:
560kw
Rated speed:
1500rpm
No. of cylinder:
8
Control Systems:
mechanical /electronic
Aspiration Mode:
Turbocharged
Inter-cooling Method
CAC
Cylinder Type:
One-cylinder-one-head
Displacement:
15.874L
Cylinder Arrangement:
V-form 90°angle
Effective Pressure:
28.2bar
MAX. exhaust gas temperature:
650℃
Charge air temperature:
219℃
Inlet air (25℃/1000mbar):
2288 m3/h
Emission:
2742 kg/h
Notes: 1. While engine under testing, fan and alternator not included.
  2. According: ISO3046-1

Deutz diesel engine BF8M1015CP-LA G5 data sheet
Rated speed:
1500rpm
Dry weight:
1060kg
Max. engine width:
920.5mm
Max. engine length:
1142.3mm
Bore
132mm
Stroke
145mm
Compression ratio
16.5
Rotation direction (View from flywheel)
Anti-clockwise
Flywheel housing
SAE1
Flywheel
 14
No. of flywheel teeth
167
Engine support
Rigid bracing
Power decrease value:
By increasing per 100m while exceeding an altitude of 1000m
≤0.90%
By increasing per 10 ℃ while exceeding a temperature of 30 ℃
≤4%
Battery voltage:
24V
Starter rated power:
8kW
Generator Capacity:
35/55A
Generator voltage:
28.5V
Max. exhaust back pressure:
50mbar
Max. allowable air inlet resistance:
50mbar
Turbocharger inlet size:
150mm
Turbocharger exhaust flange connect bolt:
M10mm
Turbocharger exhaust flange inner diameter size:
117mm
Min. oil pressure at 1500rpm (oil temperature 90℃):
≥3bar
Min. oil pressure at 600rpm (oil temperature 90 ℃):
≥1bar
Oil temperature of normal operation:
<130℃
Oil consumption rate:
<0.3% of fuel consumption
Oil pan:
Flywheel side
Oil pan inclination:
22.5
Initial oil filling:
48L
Oil filter element type:
Disposable filter
No. of oil filter element:
1
Cooling Systems
Engine coolant capacity:
21L
Water-pump flow:
347L/min
Water-pump pressure:
1.25bar
Allowable pressure loss of cooling system (include pipeline): 
≤0.35bar
Heat carry off by coolant
330kW
InOutlet coolant size
70mm
Temperature of switch on two thermostats respectively
79/87℃
Temperature of switch on two thermostats totally
94/102℃
Max. allowable operating temperature:
103℃
Temperature difference between inlet and outlet coolant
≤8℃
Inter-cooler cooling power:
130kW
Charge air outlet size:
127mm
Fan:
Exhaust type
Fan connection:
Gear drive + coupler
Fan diameter:
980mm
Air volume of fan:
6.2m3/s
Fan power consumption:
≤14.1kW
Fan transmission ratio:
0.96
Cold starting systems
Lowest ambient temperature of cold starting without assistant (standard configuration) :
-17℃
Lowest ambient temperature of cold starting with flame preheat plug:
-32℃
Fuel Systems
Cylinder ignition sequence:
1-8-4-5-7-3-6-2
Idle speed:
650rpm
Low-pressure pump oil load capacity
190L/h
Engine stop:
Energized to stop
Fuel filter element type:
Disposable filter
No. of the fuel filter element:
2

During the use of Deutz 500kw diesel generator set, What should we pay attention to?
1.We should drain the the accumulated water in the oil-water separator after every 50 hours of operation and check the electrolytic level of starting battery;
2.Check the valve clearance and fuel injector after 200-300 hours of operation;
3.It is necessary to check and adjust the drive belt after every 400 hours of operation. If necessary, replace it. Check and clean the radiator chip and discharge the sludge in the fuel tank;
4.Replace the lubricating oil and lubricating oil filter every 600 hours of operation or at least every 12 months;
5.The frequency of lubricating oil change cycle of the unit varies according to the quality of lubricating oil, sulfur content of fuel oil and the consumption of lubricating oil by the unit;
6.Replace the oil-water separator and fuel filter every 800 hours of operation. And check whether the turbocharger and the intake pipe is leakage or not, and the fuel pipe shall be checked and cleaned;
7.Adjust the valve clearance after every 1200 hours of operation. Replace the air filter and coolant, and thoroughly clean the radiator chip and water channel of the water tank after every 2000 hours of operation;
8.Check the fuel injector, thoroughly check and clean the turbocharger, and comprehensively check the engine equipment after every 2400 hours of operation.

Jiangsu Starlight has focused on high Deutz generator set for more than 43 years, welcome to inquire us(sales@dieselgeneratortech.com) for good performance product and competitive price.

Comments

Popular posts from this blog

New Yuchai engine YC6K600-D30 power for diesel generator 50Hz

Technical Parameters of Boduan 500KW Weichai Generator Set 6M33D572E200

  The 6M33D633E200 diesel engine is a special-purpose diesel engine for land-based power generation in the M33 series. It is a new-structure power generation diesel engine with a centrally - located turbocharger developed by Weichai Power Co., Ltd. in 2016. Continuous Power (COP): The maximum power at which the diesel engine can run continuously under a constant load with no limit on the annual operating hours. It is the ISO standard power. Prime Power (PRP): The maximum power at which the diesel engine can run continuously under variable loads with no limit on the annual operating hours. It is an ISO standard power that allows a 10% overload. Standby Power (ESP): The maximum power in a certain variable - power series that the diesel engine can operate for up to 200 hours per year. It is an ISO standard power with limited fuel consumption.   Operating Conditions and Applications of Baudouin  500KW Weichai Generator Set  Diesel Engine Power Classification Operating Co...

How to know and solve faults of genset voltage transformer

 Today Starlight Power shares the common faults for voltage transformer of diesel generator set. Hope it is helpful to you. 1) The insulation between iron chips is damaged. Fault phenomenon: temperature rises during operation. The possible causes of the failure are: poor insulation between iron chips, bad use of environmental conditions or long-term operation under high temperature, which promote the insulation aging between iron chips. (2) Poor contact between grounding plate and iron core. Fault phenomenon: there is discharge sound between iron core and oil tank during operation. Cause of failure: the grounding plate is not inserted tightly, and the mounting screw is not tightened. (3) The iron core is loose. Fault phenomenon: abnormal vibration or noise during operation. The cause of failure: the iron core clamp is not clamped, and the iron chip is loose. (4) Turn to turn short circuit of winding. Fault phenomenon: during operation, the temperature rises, there is ...