Skip to main content

Archive

Show more

Approved CE ISO 750kw Shangchai Diesel Generating Set--Starlight Power

750kw Shangchai Diesel Generator Set is assembled by Starlight Power manufacturer. The genset is equipped with Shangchai engine model SC33W1150D2, Stamford alternator HCI 634H1 and Deep Sea controller DSE7320MKII.

1. Diesel generator set main technical data
Manufacturer: Jiangsu Starlight Electricity Equipments Co.,Ltd.
Prime/standby output power: 750kw/825kw
Type: Open type or Silent type
Speed/frequency: 1500rpm/50Hz
Voltage: 230/400V or as your required
Noise level: open type: 100dBA at 7 meters, soundproof type: 75dBA at 7 meters.
Steady state voltage regulation rate: ≥±2.5%
Transient voltage regulation rate: ≤+25% , ≥-15%
Voltage stability time : ≤3s
Voltage fluctuation rate: ≤ ±0.5%
Frequency stability time: ≤6s
Frequency Waving: ≤1.5%
Steady state frequency regulation rate: ≤0.5%
Transient frequency regulation rate: ≤ ±5%
Frequency volatility rate: ≤1%
Accessories include battery(maintenance free), silencer, shock-reducing rubber, user’s operation and maintenance manual etc.
 Shangchai diesel generator set

2. Diesel engine SC33W1150D2 data
Manufacturer: Shanghai Diesel Engine Co.,Ltd.
Prime/standby power: 782kw/820kw
Speed: 1500rpm
The engine performance is as per GB/T2820, ratings are based on GB/T1147.1.
Prime power is available for an unlimited number of hours per year in a variable load application. The permissible average power output over 24 hours of operation shall not exceed 80% of the prime power rating.
Standby power is available in the event of a utility power outage or under test conditions for up to 200 hours of operation per year.
The permissible average power output over 24 hours of operation shall not exceed 80% of the standby power rating.
SPECIFICATIONS
Engine model: SC33W1150D2
Engine Type:line, 4 strokes, 6 cylinder(wet liner), direct injection, water-cooled, Turbo charged ,air-to-air intercooled.
Bore × stroke: 180(7.09) × 215(8.47) mm(in.)
Displacement: 32.8(2001) lit.(in3)
Compression ratio:15 : 1
Firing order:1-5-3-6-2-4
Injection timing:22°BTDC
Rotation: Counter clockwise viewed from Flywheel
FUEL SYSTEM
Injection pump:Longkou in-line “P11” type
Governor:Electric type
Feed pump: Mechanical type
Injection nozzle Multi hole type
Opening pressure:290kg/cm2 (4125 psi)
Fuel filter:Full flow, cartridge type
Used fuel: Diesel fuel oil
LUBRICATION SYSTEM
Lub. Method:Fully forced pressure feed type
Oil pump:Gear type driven by crankshaft
Oil filter:Full flow, cartridge type
High level: 75 L ( 19.8 gal.)
Low level: 50 L ( 13.2 gal.)
MECHANISM
Type:Over head valve
Number of valve: Intake 1, exhaust 1 per cylinder
Valve lashes at cold: Intake 0.4mm (0.0158 in.)
Exhaust: 0.45mm (0.0177 in.)
COOLING SYSTEM
Cooling method:Fresh water forced circulation
Water capacity:56L ( 14.78 gal.)--Engine only
Heat rejection to CAC: 49.1kcal/sec @1,500 rpm
Pressure system Max. 0.5 kg/cm2 ( 7.11 psi)
Water pump: Centrifugal type driven by belt
Water pump Capacity: 1150L(303.6gal.)/min
Thermostat: Wax–pellet type restrictions, opening temp. 77°C Intake system 3kPa initial, full open temp. 90°C 6 kPa final
Cooling fan:Blower type,iron Exhaust system 11 kPa max. 1371 mm diameter, 8 blades.
Cooling air flow:20.82 m³/s
ELECTRICAL SYSTEM
Charging generator: 28V×55A in.
Voltage regulator: Built-in type IC regulator
Starting motor: 24V×11kW
Battery Voltage: 24V in3
Battery Capacity: 200 AH

 Silent generator

3.Alternator data
Model: Stamford HCI 634H1
Manufacturer: Cummins generator Technology(China) Co.,Ltd.
Alternator Capacity:937.5kva
Speed: 1500rpm
Voltage: 230/440V or as your required
Protection: IP23
Overload: (PRP110% load can run 1 hour
Excitation mode: Brushless and self-exciting
Voltage Regulation: AVR automatic voltage regulation
Number of phase and access act:3-phase 4-wire, Neutral grounding
Insulation class: H/H
Alternator Efficiency:95%
Voltage regulation, steady state: ≤±1%

4.Control panel data
Model: Deep Sea DSE7320MKII( Auto Mains (Utility) Failure Control Module)
Manufacturer: Shenzhen Haiway Technology Co.,Ltd.
The DSE7320 MKII is a powerful, new generation Auto Mains (Utility) Failure genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel or gas Gen-set applications. Please see details attached datasheet document and manual.

Above is technical specifications of 750kw Shangchai diesel genset, we also have other brands diesel engine and alternator, if you plan to purchase diesel generators, welcome to contact us with your requirements, we will give good quality, best price and service. Our email sales@dieselgeneratortech.com.

Comments

Popular posts from this blog

New Yuchai engine YC6K600-D30 power for diesel generator 50Hz

Technical Parameters of Boduan 500KW Weichai Generator Set 6M33D572E200

  The 6M33D633E200 diesel engine is a special-purpose diesel engine for land-based power generation in the M33 series. It is a new-structure power generation diesel engine with a centrally - located turbocharger developed by Weichai Power Co., Ltd. in 2016. Continuous Power (COP): The maximum power at which the diesel engine can run continuously under a constant load with no limit on the annual operating hours. It is the ISO standard power. Prime Power (PRP): The maximum power at which the diesel engine can run continuously under variable loads with no limit on the annual operating hours. It is an ISO standard power that allows a 10% overload. Standby Power (ESP): The maximum power in a certain variable - power series that the diesel engine can operate for up to 200 hours per year. It is an ISO standard power with limited fuel consumption.   Operating Conditions and Applications of Baudouin  500KW Weichai Generator Set  Diesel Engine Power Classification Operating Co...

How to know and solve faults of genset voltage transformer

 Today Starlight Power shares the common faults for voltage transformer of diesel generator set. Hope it is helpful to you. 1) The insulation between iron chips is damaged. Fault phenomenon: temperature rises during operation. The possible causes of the failure are: poor insulation between iron chips, bad use of environmental conditions or long-term operation under high temperature, which promote the insulation aging between iron chips. (2) Poor contact between grounding plate and iron core. Fault phenomenon: there is discharge sound between iron core and oil tank during operation. Cause of failure: the grounding plate is not inserted tightly, and the mounting screw is not tightened. (3) The iron core is loose. Fault phenomenon: abnormal vibration or noise during operation. The cause of failure: the iron core clamp is not clamped, and the iron chip is loose. (4) Turn to turn short circuit of winding. Fault phenomenon: during operation, the temperature rises, there is ...