Skip to main content

Archive

Show more

Starlight Power Successfully Signed 656KW Yuchai Generator Set

 

On June 26, Starlight Power and Chengdu Tonganda Logistics Co., Ltd. successfully signed a 656KW Yuchai diesel generator set. The unit is used for emergency backup power supply for plots 1 and 2 of Chengdu Baofeng Jiuzhu Project. In addition, Starlight Power is also responsible for the environmental protection and noise reduction project of the generator room of the project.

 

It is understood that the Baofeng Jiuzhu project is jointly funded and constructed by Chengdu Tonganda Logistics Co., Ltd. and Chengdu Tonganda Industrial Co., Ltd. It is located at the exit of Sanhechang Station of Chengdu Metro Line 3. The community covers an area of 68 mu, with 30% greening and a plot ratio of 2.8. The project is 100 meters away from the subway entrance and exit of Sanhechang Station, and there are many main roads at the entrance. The project is adjacent to a number of ecological parks and is very livable. There are rich educational resources within 3 kilometers of the project, from kindergartens to universities. There are many commercial shopping plazas around, and commercial supporting resources are relatively abundant.

 

diesel generator set


Thanks to Chengdu Tonganda Logistics Co., Ltd. and Chengdu Tonganda Industrial Co., Ltd. for choosing Starlight Power as the supplier for this diesel generator set purchase, and thank them for their support and trust in Starlight Power.

 

All the coil core wires inside the motor of the Yuchai diesel generator set purchased by the user are made of pure copper, and the quality standards of the unit comply with the "Code for Construction and Acceptance of Grounding Devices" GB5016 and "General Technical Conditions for Power Frequency Diesel Generators" GB2820-90 , "Code for Design of Power Supply and Distribution System" GB50052-95 and other specifications, the product has the advantages of compact structure, large power reserve, stable operation, good speed regulation performance, low emission and low noise. Looking forward to your inquiry, for more details, please contact us with sales@dieselgeneratortech.com

标签：

Comments

Post a Comment

Popular posts from this blog

New Yuchai engine YC6K600-D30 power for diesel generator 50Hz

Post a Comment
Read more

Technical Parameters of Boduan 500KW Weichai Generator Set 6M33D572E200

  The 6M33D633E200 diesel engine is a special-purpose diesel engine for land-based power generation in the M33 series. It is a new-structure power generation diesel engine with a centrally - located turbocharger developed by Weichai Power Co., Ltd. in 2016. Continuous Power (COP): The maximum power at which the diesel engine can run continuously under a constant load with no limit on the annual operating hours. It is the ISO standard power. Prime Power (PRP): The maximum power at which the diesel engine can run continuously under variable loads with no limit on the annual operating hours. It is an ISO standard power that allows a 10% overload. Standby Power (ESP): The maximum power in a certain variable - power series that the diesel engine can operate for up to 200 hours per year. It is an ISO standard power with limited fuel consumption.   Operating Conditions and Applications of Baudouin  500KW Weichai Generator Set  Diesel Engine Power Classification Operating Co...
Post a Comment
Read more

How to know and solve faults of genset voltage transformer

 Today Starlight Power shares the common faults for voltage transformer of diesel generator set. Hope it is helpful to you. 1) The insulation between iron chips is damaged. Fault phenomenon: temperature rises during operation. The possible causes of the failure are: poor insulation between iron chips, bad use of environmental conditions or long-term operation under high temperature, which promote the insulation aging between iron chips. (2) Poor contact between grounding plate and iron core. Fault phenomenon: there is discharge sound between iron core and oil tank during operation. Cause of failure: the grounding plate is not inserted tightly, and the mounting screw is not tightened. (3) The iron core is loose. Fault phenomenon: abnormal vibration or noise during operation. The cause of failure: the iron core clamp is not clamped, and the iron chip is loose. (4) Turn to turn short circuit of winding. Fault phenomenon: during operation, the temperature rises, there is ...
Post a Comment
Read more