Skip to main content

Archive

Show more

How to Maintain Diesel Generator Lubrication



How to Maintain Diesel Generator Lubrication


 Much like another of our major internal organs, the oil pan functions in a similar fashion to the liver. It is the prime filter of impurities in our system. Whatever combustion impurities exist inside the walls of the engine, none will avoid detection in the oil pan. An inspection of the oil during a routine change will inform the maintenance technician whether that combustion is complete or suffering from serious problems.

A diesel engine is designed to keep the different internal functions separated from one another: Combustion from lubrication and cooling. Metal rings adorn the perimeter of the piston head to prevent oil and diesel from mixing. Diesel fuel that escapes combustion will stick to the shaft and eventually migrate south into the oil pan. So will another common impurity prevalent in diesel: water. It too will resist combustion and escape into the oil pan.

But fuel is not the only source of water contained in a generator. Water is the primary ingredient in the cooling system that prevents the friction caused by the moving parts from overheating. If minute cracks or fissures exist inside the combustion chamber, coolant will be prevalent in the oil pan reservoir.

On an operational generator the oil is scheduled to be changed after 300 hours of service, the oil filter included. *Maintenance Tip* - pour the new oil into the new filter before installing it in the machine. This will ensure the filter doesn't run in a dry state before being engaged by the rest of the lubrication system.



With the oil in the drain pan, use a clear glass container to scoop a sample of the expired oil. If combustion has been exemplary, the oil will look only slightly darker than the golden brown it was before it entered service. If the oil is black, a little soot is escaping through the combustion chamber. While soot is a normal by-product of diesel engine combustion, further investigation may be necessary to rule out a more pervasive issue.

A more immediate concern is if the colour of the oil is a light grey. This is a sure indicator that water in some form is entering the combustion chamber, either through the fuel system or as coolant. Have the oil tested to determine the source and initiate further corrective measures.

Diesel Generator lubrication processes are not restricted to the engine. Some machines employ a drive shaft mechanism connected to a fan to assist air circulation. Proper lubrication, in the form of grease, will keep those mechanisms operating efficiently. Check those components at the same time as the oil change.

In addition to engine coolant, the lubrication system is also sensitive to changing temperatures. Refer to the manual or one of our technicians to determine the ideal oil viscosity for your operating conditions.








Comments

Popular posts from this blog

New Yuchai engine YC6K600-D30 power for diesel generator 50Hz

Silent Cummins 640kw Diesel Generating Sets

Technical data of 800KVA AC diesel generator set The DG Set is skid mounted, directly coupled with Cummins water cooled engine with built in shock absorber for anti vibration. The alternator is Stamford brand with brushless and self excited, with control panel and protection system complete set. Prime power: 640KW/800KVA Standby power:704KW/880KVA Rated voltage: 230/400V Rated current: 1152A Speed/frequency:1500rpm/50Hz ( or 1800rpm/60Hz) Power factory:0.8lag Size: open type genset: 4.2 x1.82x2.25m, silent genset: 6.5 x2.6 x2.78m Net wight: open type genset: 7800kg,   silent genset : 12000kg Technical Data of Diesel Engine Diesel engine brand/model: Chongqing Cummins/ KTA38-G2B( full new) Prime/standby power: 790KW/920KW 4 Stroke Cycle , 60° Vee , 12 Cylinder, Turbocharged &Aftercooled, 1500rpm, 50Hz, bore/stroke: 159/159mm. The Cummins diesel engine is equipped with electronic type governor, over speed shutdown devices to protect against runaway when electronic governor or con...

Guides to Clean VOLVO Diesel Generator Cooling System

VOLVO Engine Cooling System Volvo engine's internal cooling system makes sure the engine works at the right temperature. It is a closed system that must always be filled with a mixture of concentrated coolant and water in order to protect the engine against internal corrosion, cavitation and bursting due to freezing. Coolant of a suitable chemical composition must be used all year round. This also applies in areas where there is never any risk of freezing, to provide the engine of  diesel generator set   with full corrosion protection. The use of anti-corrosion agents alone is not permitted in Volvo Penta engines. Never use water alone as a substitute for coolant. The corrosion protection additives become less effective over time, which means that the coolant must be changed at regular intervals; refer to Maintenance Schedule. The cooling system must be flushed whenever the coolant is changed; Volvo Penta coolants have been prepared to work best ...