Skip to main content

Archive

Show more

Volvo Penta Provides Electrified Power Solutions For Both Land And Sea



Hot on the heels of Volvo Pentas announcement that it will provide electrified power solutions for both land and sea by 2021, the company has revealed details of a hybrid-powered Inboard Performance System (IPS) concept.

Designed to extend further IPSs advantage, the hybrid variant will allow boats to operate in the low-and-zero emission zones that are expected to be introduced in the coming years*. The hybrid configuration will also bring additional benefits, including lower noise, vibrations and running costs.

Based on proven Volvo Group technology and experience
The IPS hybrid system is planned initially for the 8-13 liter engine range suitable for powering vessels such as ferries, pilot and supply boats, as well as yachts. It uses proven hybrid technology first developed within the Volvo Group, which Volvo Penta generator set is now adapting and certifying for marine applications, using its extensive boat propulsion experience.

A hybrid provides a flexible solution, one that maintains the high efficiency offered by the IPS system and adds the ability to run in zero emission environments,says Niklas Thulin, Volvo Pentas Director of Electromobility.

With full torque from the electric motor available instantly, the boat will maintain the responsiveness and controllability that IPS is famous for in electric-only mode, as well as offering the ability to run at 10 to 12 knots.

How it works
A clutch and electric motor are added between the engine and the IPS pod. The electric motor is supported by scalable (depending on application needs) Li-ion battery packs that can be charged externally using AC or DC chargers; or recharged using the primary diesel engine. Opening of the clutch allows the boat to run in electric-only mode, and with the clutch closed both diesel and electric power can be used in parallel. In terms of operation, the captain will use the familiar control interfaces of the IPS system, with the addition of new drive modes to choose from.

Scalable design
The modular nature of the battery packs allows customers to tailor the design and performance of both commercial and leisure boats. More battery capacity offers extended electric-only cruising, and with frequent external charging the use of smaller diesel engines and lower fuel costs. With the electric motor and batteries maintenance-free and the diesel engine operating for fewer hours the cost of servicing should also be noticeably lower. Volvo Penta will continue to support customers in tailoring a prop-to-helm configuration based on the specific application needs.

The parallel hybrid IPS is currently in early stage development, with the system being validated at the companys test center in Gothenburg, and a test boat planned to enter sea trials in early 2020.

During this process, customer input will play an important element in developing the system for use in a range of marine applications. The hybrid IPS will be available to commercial customers in 2021, followed by a leisure boat option soon after. Over time this system will evolve into more hybrid technologies and all-electric drive variants, as part of Volvo Pentas commitment to offering customers flexible technical solutions that best meet their needs.




Comments

Popular posts from this blog

Components of Cummins PT Fuel System

When it comes to Cummins generator, it is well known that the gensets have good quality, low fuel consumption, low noise, big output power and reliable performance. The reliable stability, economy, power performance, durability and environmental safety is welcomed by customers. In last article, we talk about CCEC Cummins diesel engines operating principles. Well, in this article, you will learn what are the major components of its PT Fuel System. Fuel System The PT fuel system is used exclusively on Cummins Diesels. The identifying letters, “ PT ” are an abbreviation for “ pressure-time ” . The operation of the Cummins PT Fuel System is based on the principle that the volume of liquid flow is proportionate to the fluid pressure, the time allowed to flow and the passage size through which the liquid flows. To apply this simple principle to the Cummins PT Fuel System , it is necessary to provide: 1. A fuel pump. 2. A means of controlling pressure of

Leroy-Somer Alternator AVR R450

1 - GENERAL INFORMATION of Leroy-Somer Alternator AVR R450 1.1 - Description The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers. - Operating temperature: - 30°C to + 65°C. - Storage temperature: - 55°C to + 85°C. - Shocks on the base: 9 g depending on the 3 axes. - Vibrations: less than 10 Hz, 2 mm half-peak amplitude 10 Hz to 100 Hz: 100 mm/s, above 100 Hz: 8 g. The AVR is IP00, it must be incorporated in an environment which ensures it a IP20 protection. 1.2 - Characteristic The connection is realised by “Faston” connectors and the voltage sensing is single - phase. 2 - POWER SUPPLY Both the SHUNT/AREP & PMG excitation systems are controlled by the AVR. 2.1 - AREP excitation system With AREP excitation, the electronic AVR is powered by two auxiliary windings which are independent of the voltage sensing circuit. The first winding has a voltage proportional to the   alternator   main voltage (Shunt characteristic),

New Yuchai engine YC6K600-D30 power for diesel generator 50Hz