Skip to main content

Archive

Show more

Why is output voltage of generator unbalanced

There are three main reasons for unbalanced output voltage of diesel generator set

1. The three-phase load is unbalanced.

2. There is a slight short circuit in the generator winding.

3. Generator manufacturing defects (unequal turns of three-phase winding).

At this time, the following situations may occur:

1. The output power of the generator set is decreased, which can not meet the power requirements of users

2. The three-phase voltage asymmetry makes the neutral point potential of generator set shift

3. If the neutral current is too large, the operating temperature of distribution transformer will rise, and the transformer will be burned out in serious cases

4. The voltage of some phases is high and that of others is decreased

5. The generator is burnt out, affecting the normal power supply

Therefore, we must pay attention to the three-phase imbalance in the use of diesel generator set. If the output power cannot be changed, the wiring mode should be replaced to prevent damage to the generator sets.

What's wrong with the output voltage imbalance of the above generator set? The information is sorted out and released by the diesel generator manufacturer Starlight Power. Hope it is helpful to you.

If you are interested in electric diesel generators or have plan to order, welcome to contact us by email sales@dieselgeneratortech.com. We also a manufacturer of diesel generators in Jiangsu China, power range is from 25kva to 3125kva, covering Cummins, Volvo, Perkins, Deutz, Yuchai, Shangchai, Ricardo, Weichai etc.

Comments

Popular posts from this blog

Components of Cummins PT Fuel System

When it comes to Cummins generator, it is well known that the gensets have good quality, low fuel consumption, low noise, big output power and reliable performance. The reliable stability, economy, power performance, durability and environmental safety is welcomed by customers. In last article, we talk about CCEC Cummins diesel engines operating principles. Well, in this article, you will learn what are the major components of its PT Fuel System. Fuel System The PT fuel system is used exclusively on Cummins Diesels. The identifying letters, “ PT ” are an abbreviation for “ pressure-time ” . The operation of the Cummins PT Fuel System is based on the principle that the volume of liquid flow is proportionate to the fluid pressure, the time allowed to flow and the passage size through which the liquid flows. To apply this simple principle to the Cummins PT Fuel System , it is necessary to provide: 1. A fuel pump. 2. A means of controlling pressure of

Leroy-Somer Alternator AVR R450

1 - GENERAL INFORMATION of Leroy-Somer Alternator AVR R450 1.1 - Description The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers. - Operating temperature: - 30°C to + 65°C. - Storage temperature: - 55°C to + 85°C. - Shocks on the base: 9 g depending on the 3 axes. - Vibrations: less than 10 Hz, 2 mm half-peak amplitude 10 Hz to 100 Hz: 100 mm/s, above 100 Hz: 8 g. The AVR is IP00, it must be incorporated in an environment which ensures it a IP20 protection. 1.2 - Characteristic The connection is realised by “Faston” connectors and the voltage sensing is single - phase. 2 - POWER SUPPLY Both the SHUNT/AREP & PMG excitation systems are controlled by the AVR. 2.1 - AREP excitation system With AREP excitation, the electronic AVR is powered by two auxiliary windings which are independent of the voltage sensing circuit. The first winding has a voltage proportional to the   alternator   main voltage (Shunt characteristic),

New Yuchai engine YC6K600-D30 power for diesel generator 50Hz