Today Starlight Power shares the common faults for voltage transformer of diesel generator set. Hope it is helpful to you. 1) The insulation between iron chips is damaged. Fault phenomenon: temperature rises during operation. The possible causes of the failure are: poor insulation between iron chips, bad use of environmental conditions or long-term operation under high temperature, which promote the insulation aging between iron chips. (2) Poor contact between grounding plate and iron core. Fault phenomenon: there is discharge sound between iron core and oil tank during operation. Cause of failure: the grounding plate is not inserted tightly, and the mounting screw is not tightened. (3) The iron core is loose. Fault phenomenon: abnormal vibration or noise during operation. The cause of failure: the iron core clamp is not clamped, and the iron chip is loose. (4) Turn to turn short circuit of winding. Fault phenomenon: during operation, the temperature rises, there is ...
1500kVA Cummins Diesel Generator Set Assembly in Factory
ReplyDeleteSpecifications is as follows:
Diesel engine : Cummins / KTA50-GS8
Alternator: Marathon / MX-1240-4
Controller: Deep Sea / 7320
Engine bore and stroke: 159x159mm
Cylinder: 16 cylinder
Max. altitude: 1500m
Cummins more power at:https://www.dieselgeneratortech.com/cummins/